Steps to update LAN EEPROM:

	UEFI
		1. Extract the files and copy them to a USB. 
		2. Boot up UEFI Shell with USB plugged in.
		3. Go to your USB, execute "fs0:".
		4. Execute "CHK_VER.nsh". 
		5. Execute "type inventory.txt" to look for current XL710 firmware version.
			- If current version is 6.01 (ETrackId 800036E7 or 80003494) please STOP and use package MTGi4S2C1_NUP first to update from 6.01 to 7.20 before continue with this package to update to 9.00. 
			- If current version is 7.00 (ETrackId 80004EA4) 7.10 (ETrackId 80007D43) 7.20 (ETrackId 800082B4) or 8.30 (ETrackId 8000A9BA) then proceed to the next step to update to 9.00 firmware.
		6. To update 8.30 FW with LLDP enabled, execute "LLDP_EN.nsh".
	             		     with LLDP disabled, execute "LLDP_DIS.nsh".
		7. AC off-on.

	Linux
		1. Make sure to have administrator privileges.
		2. If CHK_VER.sh, LLDP_EN.sh, LLDP_DIS.sh, and nvmupdate64e are NOT executeable, run "chmod +x CHK_VER.sh LLDP_EN.sh LLDP_DIS.sh nvmupdate64e".
		3. Execute "./CHK_VER.sh". 
		4. Open inventory.txt to look for current XL710 firmware version.
			- If current version is 6.01 (ETrackId 800036E7 or 80003494) please STOP and use package MTGi4S2C1_NUP first to update from 6.01 to 7.20 before continue with this package to update to 9.00. 
			- If current version is 7.00 (ETrackId 80004EA4) 7.10 (ETrackId 80007D43) 7.20 (ETrackId 800082B4) or 8.30 (ETrackId 8000A9BA) then proceed to the next step to update to 9.00 firmware.
		5. To update 8.30 FW with LLDP enabled, execute "./LLDP_EN.sh".
	         	    	     with LLDP disabled, execute "./LLDP_DIS.sh".
		6. Shutdown and then AC off-on.

	ESXi_x64
		1. Make sure to have administrator privileges.
		2. If CHK_VER_ESXi.sh, LLDP_EN_ESXi.sh, LLDP_DIS_ESXi.sh, and nvmupdaten64e are NOT executeable, run "chmod +x CHK_VER_ESXi.sh LLDP_EN_ESXi.sh LLDP_DIS_ESXi.sh nvmupdaten64e".
		3. Execute "./CHK_VER_ESXi.sh". 
		4. Open inventory.txt to look for current XL710 firmware version.
			- If current version is 6.01 (ETrackId 800036E7 or 80003494) please STOP and use package MTGi4S2C1_NUP first to update from 6.01 to 7.20 before continue with this package to update to 9.00. 
			- If current version is 7.00 (ETrackId 80004EA4) 7.10 (ETrackId 80007D43) 7.20 (ETrackId 800082B4) or 8.30 (ETrackId 8000A9BA) then proceed to the next step to update to 9.00 firmware.
		5. To update 8.30 FW with LLDP enabled, execute "./LLDP_EN_ESXi.sh".
	             		     with LLDP disabled, execute "./LLDP_DIS_ESXi.sh".
		6. Shutdown and then AC off-on.